technical data sheet

diese Seite auf deutsch

Technical data on item group 114447
Dual Power over Ethernet injector 100-240V AC 2x 802.3at 25W

The Industrial Dual Power over Ethernet injector connects a PoE PD (powered device) end device with a PoE PD network component and feeds both devices according to IEEE 802.3at / IEEE 802.3af standard with up to each 25W operating current. Integrated mounting holes enable wall mounting without additional Panels or mounting on 35mm DIN rail in combination with snap-in elements.
Technical data
Product	Dual Industrial Fast Ethernet and Gigabit Ethernet PoE injector according to IEEE 802.3at and IEEE 802.3af standard
Port(s) electrical	Data input: 1000Base-T Gigabit Ethernet 10/100/1000MBit/s
PoE ports	Data output: 1000Base-T Gigabit Ethernet 10/100/1000MBit/s current output: IEEE 802.3at +56V DC 25W Load min./max. 0A / 0.45A Load reg. 5 % line reg. 1 % Ripple 1 % Noise 2 % Noise bandwidth from DC to 20MHz Terminated with a 47uF Capacitor and 0.1uf MPE Capacitor of proper polarity
Pin assignment PoE	pin 1 2 3 4 5 6 7 8 data 1000Base A+ A- B+ C+ C- B- D+ D- data 100Base RX+ RX- TX+ TX- power V DC (+) V DC (+) V DC (-) V DC (-)
LEDs	green: PoE normal output according to IEEE 802.3at
Housing	Plastic
Mounting	item mounting 114447001 114447002 114447101 114447102 wall DIN rail wall DIN rail
Dimensions	LxWxH 125x72x38mm
Power requirements	100V AC .. 240V AC internal 50Hz .. 60Hz 1.02A @ 120V AC 0.63A @ 240V AC
Efficiency	80% min. at Full Load, @ 120V AC
Inrush current	120V AC: 25A max. 240V AC: 50A max.
Operating temperature	-25°C .. +50°C
Cooling	Fanless - Free air cooling
relative humidity (non condensing)	5% .. 90%
Storage temperature	-40°C .. +85°C
Compliance	EN55032 Class B, FCC Class A, EN60950-1 (2nd Edition)
Country of origin	Taiwan
Ordering information item 114447001 Fast Ethernet PoE injector 100-240V AC 2x IEEE 802.3at 25W 114447002 100Base PoE injector 100-240V AC 2x IEEE 802.3at 25W DINrail 114447101 Gigabit Ethernet PoE injector 100-240V AC 2x IEEE 802.3at 25W 114447102 GbE PoE injector 100-240V AC 2x IEEE 802.3at 25W DINrail
Dimensional drawing
The product description has been prepared with great care. No liability is accepted for fallacies or errors. Subject to change.